deze mensen gaan tot 400pk
As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat. PLEASE NOTE: As these intakes are made of hand-crafted carbon fiber, it is going to take a few months to get production ramped up. So please expect back orders for the first couple of months. Horsepower is increased by +14 Hp @ 6000 rpm and Torque is increased by +16ft-lbs @ 3400 rpm with Dinan Stage 3 Software, DINAN Intercooler and Free Flow Exhaust. Stage 2 software, Free Flow Exhaust produces 12 Hp and 13 ft-lb torque Stage 1 software, Free Flow Exhaust produces 9 Hp and 10 ft-lb torque Completely Stock car produces 5 Hp and 6 ft-lb torque Dinan Performance Software is highly recommended.
dat ding gaat er een partij vandoor nu. Echt grappig hoe zo'n klein wagentje accelereert. 200 km/h is echt niets hoor. En het gaat allemaal zo makkelijk en comfortabel. Ik moet echt tegen een andere snelle auto gaan rijden, om echt het verschil te zien. Ik moet vanavond naar Rotterdam, dus wie weet kom ik nog wat leuks tegen. 
8)
