Riceaux schreef: 17 apr 2018, 10:11
Prachtig Robin! Hoe bouw je ze om van AWD naar RWD?
Ga in AC Cartuner naar de Huracan Performante, noem je nieuwe kar bijv 'RWD'.
Ga dan in ADVANCED TUNING naar drivetrain.ini
Delete alles en copy paste onderstaande daarin: dat is dus de Perf en daar heb ik middendiffs weggehaald en alle andere toestanden die nietvan toepassing waren plus goodies van de Huracan GT3(schakeltijden etc máár met behoud van de gearratios van de normale) toegevoegd:
----------------------
[HEADER]
VERSION=3
[TRACTION]
TYPE=RWD
[GEARS]
COUNT=7 ; forward gears number
GEAR_R=-2.647 ; rear gear ratio
; forward gears ratios. must be equal to number of gears defined on count
GEAR_1=3.133
GEAR_2=2.083
GEAR_3=1.575
GEAR_4=1.244
GEAR_5=0.979
GEAR_6=0.788
GEAR_7=0.677
FINAL=4.89
[DIFFERENTIAL]
POWER=0.30 ; differential lock under power. 1.0=100% lock - 0 0% lock
COAST=0.55 ; differential lock under coasting. 1.0=100% lock 0=0% lock
PRELOAD=50 ; preload torque setting
[GEARBOX]
CHANGE_UP_TIME=100 ; change up time in milliseconds
CHANGE_DN_TIME=150 ; change down time in milliseconds
AUTO_CUTOFF_TIME=130 ; Auto cutoff time for upshifts in milliseconds, 0 to disable
SUPPORTS_SHIFTER=0 ; 1=Car supports shifter, 0=car supports only paddles
VALID_SHIFT_RPM_WINDOW=800 ;range window additional to the precise rev matching rpm that permits gear engage.
CONTROLS_WINDOW_GAIN=0.4 ;multiplayer for gas,brake,clutch pedals that permits gear engage on different rev matching rpm. the lower the more difficult.
INERTIA=0.017 ; gearbox inertia. default values to 0.02 if not set
[CLUTCH]
MAX_TORQUE=820
[AUTOCLUTCH]
UPSHIFT_PROFILE=NONE ; Name of the autoclutch profile for upshifts. NONE to disable autoclutch on shift up
DOWNSHIFT_PROFILE=DOWNSHIFT_PROFILE ; Same as above for downshifts
USE_ON_CHANGES=1 ; Use the autoclutch on gear shifts even when autoclutch is set to off. Needed for cars with semiautomatic gearboxes. values 1,0
MIN_RPM=1550 ; Minimum rpm for autoclutch engadgement
MAX_RPM=2400 ; Maximum rpm for autoclutch engadgement
FORCED_ON=0
[UPSHIFT_PROFILE]
POINT_0=20 ; Time to reach fully depress clutch
POINT_1=110 ; Time to start releasing clutch
POINT_2=120 ; Time to reach fully released clutch
[DOWNSHIFT_PROFILE]
POINT_0=10 ; Time to reach fully depress clutch
POINT_1=160 ; Time to start releasing clutch
POINT_2=200 ; Time to reach fully released clutch
[AUTOBLIP]
ELECTRONIC=1 ; If =1 then it is a feature of the car and cannot be disabled
POINT_0=10 ; Time to reach full level
POINT_1=50 ; Time to start releasing gas
POINT_2=80 ; Time to reach 0 gas
LEVEL=0.8 ; Gas level to be reached
[AUTO_SHIFTER]
UP=7900
DOWN=4500
SLIP_THRESHOLD=0.95
GAS_CUTOFF_TIME=0.190
[DOWNSHIFT_PROTECTION]
ACTIVE=1
DEBUG=0 ; adds a line in the log for every missed downshift
OVERREV=200 ; How many RPM over the limiter the car is allowed to go
LOCK_N=0
----------------
Dan APPLY doen en je hebt je RWD Performante. Let op hij is aardig tailhappy:)