Alles over de 1 serie (part III)
-
- Berichten: 4500
- Lid geworden op: 14 feb 2008, 22:40
- Locatie: Achter het stuur
Re: Alles over de 1 serie (part III)
Heeft Ferdi hetzelfde kapsel als GTRene en reed hij gistermiddag op de Brienenoord ri A20?
-
- Berichten: 51400
- Lid geworden op: 01 feb 2006, 15:51
- Locatie: 52° 57′ NB, 5° 56′ OL
Re: Alles over de 1 serie (part III)
Euhsteve smith schreef:Heeft Ferdi hetzelfde kapsel als GTRene en reed hij gistermiddag op de Brienenoord ri A20?
- GTRene
- Berichten: 54882
- Lid geworden op: 01 mar 2007, 19:06
- Sperdy
- Berichten: 4635
- Lid geworden op: 19 jul 2007, 11:56
- Locatie: Planet Earth
Re: Alles over de 1 serie (part III)
Als dat zo is, is Rene een hele knappe vent.steve smith schreef:Heeft Ferdi hetzelfde kapsel als GTRene ... ?
Ben trouwens een paar keer goed in de slip gegaan met de ACS1. Die 565Nm op twee achterbandjes is met droog weer eigenlijk al niet te rijden, maar met wat sneeuw en ijs wordt het pas echt fun... Bij 130km/u vol op het gas is dikke vette wielspin, gewoon op de A4.
- Brava
- Berichten: 860
- Lid geworden op: 20 mar 2006, 22:05
- Locatie: Groß Utrecht, 2004 BMW120i
Re: Alles over de 1 serie (part III)
Iemand dit al gezien? M1 volgens Autocar.
BMW’s M division has started development of an M version of the 1-series coupé, set to be equipped with a twin-turbocharged six-cylinder engine producing 350bhp.
The new two-door, details of which were first uncovered by Autocar back in November, has now been added to BMW’s stable of future production models, with right-hand-drive UK sales set to begin in mid-2011.
The decision to put the car into production has been attributed to an “overwhelmingly positive reaction” to recent customer clinics, according to at least one high-ranking BMW official. Aimed at attracting younger customers to BMW’s performance cars, the new coupé is set to become the M division’s most affordable model.
It will slot into the range beneath the M3 coupé, and should cost around £38,000, £8000 more than the 135i Coupé M Sport. That means it will compete directly with Audi’s forthcoming RS3.
Revealing the plans for the new 1-series-based model, M division boss Kay Segler said, “I want to set a clear signal that our products are financially accessible.
“With the modular production processes in place at BMW, it is possible to create performance cars that customers can not only dream about owning but also realistically afford.”
BMW is still deciding whether or not to call the car M1, a name originally used on the firm’s legendary road racer supercar in 1978. Inspiration for the new car comes from BMW’s tii concept, a sporting version of the 1-series coupé that was revealed at the 2007 Tokyo motor show.
While the powerplant in that car was never revealed, the new M car will use a revised version of BMW’s latest turbocharged straight six. In standard guise the 3.0-litre unit, recently unveiled in the 535i GT, uses a twin-scroll turbo aimed at providing a more linear delivery of power and better fuel economy than the earlier twin-turbocharged unit used in the 135i.
For the new M car the engine will re-adopt a twin-turbocharged layout, although the new system is said to differ quite dramatically from that used on the older engine; it’s likely to get a new turbo and a more efficient intercooler arrangement.
The modifications are said to be on a similar level to those seen in the recently introduced X5 M and X6 M, whose 547bhp twin-turbo 4.4-litre V8 has big changes compared with the standard V8 versions used in the X5 and X6.
The output of the new M six-pot is expected to climb to around 350bhp, some 48bhp more than the existing 135i M Sport but 70bhp less than the M3’s naturally aspirated 4.0-litre V8. More than outright power, though, it is torque that is likely to play a more significant role in defining the new car’s character.
No figures have been released, but with BMW’s standard turbocharged 3.0-litre six already producing an M3-equalling 295lb ft, the newly developed M version of this engine should be good for at least 310lb ft.
The basis for the new M-car is today’s 1-series coupé. Its driveline is likely to feature a standard six-speed dual-clutch gearbox and an electronically controlled M differential.
With a kerb weight of not much more than 1500kg, its straight-line performance should be close to that of the 1580kg M3. A relatively short 3.15:1 final drive promises a 0-60mph time of around 5.5sec.
Fuel-saving measures such as brake energy regeneration and possibly a stop-start system should also ensure the new M1 is no thirstier than the 135i, which is rated at 30.7mpg in six-speed manual guise.
Underneath, the layout of the 1-series coupé’s McPherson strut (front) and multi-link (rear) suspension will remain the same. However, BMW’s M division engineers have set about altering the suspension properties, with firmer spring and dampers and a new set of bushes, along with lightweight 18-inch alloy wheels. “We’re aiming to make it a lot more dynamic than the standard 135i,” said Segler.
Setting the M1 apart from the standard 1-series coupé will be a typically subtle M division body kit, including a deeper front spoiler, flared front wheel arches, chunkier sills, a rear deck spoiler and a deeper rear valance with four chromed exhaust pipes.
Assembly of the newest M-car is likely to take place at BMW’s Leipzig factory in Germany. alongside standard versions of the 1-series coupé.
But with 18 months to go until it goes on sale in the UK, Segler is remaining coy about projected volumes. “We’re confident it will draw new customers to the M line-up, but in these difficult economic times it’s impossible to say how it will fare,” he said. “It does, however, reveal where the brand is heading.”
BMW’s M division has started development of an M version of the 1-series coupé, set to be equipped with a twin-turbocharged six-cylinder engine producing 350bhp.
The new two-door, details of which were first uncovered by Autocar back in November, has now been added to BMW’s stable of future production models, with right-hand-drive UK sales set to begin in mid-2011.
The decision to put the car into production has been attributed to an “overwhelmingly positive reaction” to recent customer clinics, according to at least one high-ranking BMW official. Aimed at attracting younger customers to BMW’s performance cars, the new coupé is set to become the M division’s most affordable model.
It will slot into the range beneath the M3 coupé, and should cost around £38,000, £8000 more than the 135i Coupé M Sport. That means it will compete directly with Audi’s forthcoming RS3.
Revealing the plans for the new 1-series-based model, M division boss Kay Segler said, “I want to set a clear signal that our products are financially accessible.
“With the modular production processes in place at BMW, it is possible to create performance cars that customers can not only dream about owning but also realistically afford.”
BMW is still deciding whether or not to call the car M1, a name originally used on the firm’s legendary road racer supercar in 1978. Inspiration for the new car comes from BMW’s tii concept, a sporting version of the 1-series coupé that was revealed at the 2007 Tokyo motor show.
While the powerplant in that car was never revealed, the new M car will use a revised version of BMW’s latest turbocharged straight six. In standard guise the 3.0-litre unit, recently unveiled in the 535i GT, uses a twin-scroll turbo aimed at providing a more linear delivery of power and better fuel economy than the earlier twin-turbocharged unit used in the 135i.
For the new M car the engine will re-adopt a twin-turbocharged layout, although the new system is said to differ quite dramatically from that used on the older engine; it’s likely to get a new turbo and a more efficient intercooler arrangement.
The modifications are said to be on a similar level to those seen in the recently introduced X5 M and X6 M, whose 547bhp twin-turbo 4.4-litre V8 has big changes compared with the standard V8 versions used in the X5 and X6.
The output of the new M six-pot is expected to climb to around 350bhp, some 48bhp more than the existing 135i M Sport but 70bhp less than the M3’s naturally aspirated 4.0-litre V8. More than outright power, though, it is torque that is likely to play a more significant role in defining the new car’s character.
No figures have been released, but with BMW’s standard turbocharged 3.0-litre six already producing an M3-equalling 295lb ft, the newly developed M version of this engine should be good for at least 310lb ft.
The basis for the new M-car is today’s 1-series coupé. Its driveline is likely to feature a standard six-speed dual-clutch gearbox and an electronically controlled M differential.
With a kerb weight of not much more than 1500kg, its straight-line performance should be close to that of the 1580kg M3. A relatively short 3.15:1 final drive promises a 0-60mph time of around 5.5sec.
Fuel-saving measures such as brake energy regeneration and possibly a stop-start system should also ensure the new M1 is no thirstier than the 135i, which is rated at 30.7mpg in six-speed manual guise.
Underneath, the layout of the 1-series coupé’s McPherson strut (front) and multi-link (rear) suspension will remain the same. However, BMW’s M division engineers have set about altering the suspension properties, with firmer spring and dampers and a new set of bushes, along with lightweight 18-inch alloy wheels. “We’re aiming to make it a lot more dynamic than the standard 135i,” said Segler.
Setting the M1 apart from the standard 1-series coupé will be a typically subtle M division body kit, including a deeper front spoiler, flared front wheel arches, chunkier sills, a rear deck spoiler and a deeper rear valance with four chromed exhaust pipes.
Assembly of the newest M-car is likely to take place at BMW’s Leipzig factory in Germany. alongside standard versions of the 1-series coupé.
But with 18 months to go until it goes on sale in the UK, Segler is remaining coy about projected volumes. “We’re confident it will draw new customers to the M line-up, but in these difficult economic times it’s impossible to say how it will fare,” he said. “It does, however, reveal where the brand is heading.”
- romo
- Berichten: 26921
- Lid geworden op: 04 jun 2006, 17:43
- Locatie: Create a problem Incite a reaction Propose a solution The /// M-pire strikes back
Re: Alles over de 1 serie (part III)
Tja, leuk...........................maar nog steeds niet te pruimen............
en advevo is with me here..........................
en advevo is with me here..........................
- Joop
- Berichten: 8892
- Lid geworden op: 04 mar 2007, 23:20
Re: Alles over de 1 serie (part III)
Is idd. wat lastiger... Heb deze uit een boek getrokken met de specs van alle BMW personenauto's...Ruben schreef:Bedankt Joop, is dat ook ergens op internet terug te vinden?
Eindoverbrenging is in o.a. in het foldertje terug te vinden van de auto...
-
- Berichten: 11233
- Lid geworden op: 01 feb 2006, 12:57
Re: Alles over de 1 serie (part III)
even makkelijk een motor uit 535i gt erin lepelen voor ///M geld dacht het niet.
Gewoon even nieuwe 6 cil hoogtoerige ///M motor maken mannetjes. En niet makkelijk even motortje aanpassen van de AG voorraden met een turbootje.
Gewoon even nieuwe 6 cil hoogtoerige ///M motor maken mannetjes. En niet makkelijk even motortje aanpassen van de AG voorraden met een turbootje.
- SpikeY
- Berichten: 225
- Lid geworden op: 15 dec 2009, 14:53
- Locatie: Bovenkarspel
Re: Alles over de 1 serie (part III)
Ga mee in deze.. zelf was ik toch ook niet zo weg van dit model, maar hoe vaker ik em zie hoe mooier ik em ga vinden.Hans GP schreef: Geweldig! 8) Normaal vind ik er niks aan maar deze is wel erg vet! De foto's zijn ook goed..
Kwam er Hier nog wat tegen.
-
- Berichten: 9466
- Lid geworden op: 19 nov 2007, 15:31
Re: Alles over de 1 serie (part III)
Nog even een keer mijn noob vraag. Het gaat dus om het differentieel wat uit mijn 130i gehaald is. Iemand die het zeker weet en/of waar ik het op internet kan terugvinden? Op bmwfans en realoem kan ik er niks over vinden.Ruben schreef:Weet iemand wat de standaard versnellingsbak overbrenging is van een 130i? 2.47?
- GTRene
- Berichten: 54882
- Lid geworden op: 01 mar 2007, 19:06
Re: Alles over de 1 serie (part III)
hij heeft wel de M3 V8 powerdome...
straks gooien ze daar een afgeleide van de V8 M3 in, maar dan terug gebracht naar bv 3.4L en herhalen ze het trucje van de oude R6 M5 van 3.4 naar 3.6 en naar 3.8 maar dan met deze M3 V8 immers nu 4.0 maar in de GTS al 4.4 zou leuk zijn
-
- Berichten: 51400
- Lid geworden op: 01 feb 2006, 15:51
- Locatie: 52° 57′ NB, 5° 56′ OL
Re: Alles over de 1 serie (part III)
@Rene wat lul je nu allemaal weer man, blijf eens van de wodka af ouwe.
Mister staartdeling achter de komma himself met z'n 4.3.4.6 x 3.8.
Mister staartdeling achter de komma himself met z'n 4.3.4.6 x 3.8.
- RVV
- Berichten: 32209
- Lid geworden op: 01 feb 2006, 11:44
- Locatie: Rudi Rolex@Basel
Re: Alles over de 1 serie (part III)
Extreem slechte fotoshop van de 135i persdag in Zweden. Doe iets origineels als je niets hebt als blad maar ga geen ouwe fototroep recyclen.. Daar kan onze Rene niet van slapen
- romo
- Berichten: 26921
- Lid geworden op: 04 jun 2006, 17:43
- Locatie: Create a problem Incite a reaction Propose a solution The /// M-pire strikes back
Re: Alles over de 1 serie (part III)
Rico schreef:Extreem slechte fotoshop van de 135i persdag in Zweden. Doe iets origineels als je niets hebt als blad maar ga geen ouwe fototroep recyclen.. Daar kan onze Rene niet van slapen
Maakt niet uit hoe je zo`n 1er shopt.....................................je krijgt er toch standepede een beroerte van..........................
- RVV
- Berichten: 32209
- Lid geworden op: 01 feb 2006, 11:44
- Locatie: Rudi Rolex@Basel
Re: Alles over de 1 serie (part III)
Paar keer in het echt een 1 coupe tegen gekomen, wauw gevoel kwam nooit los.
-
- Berichten: 51400
- Lid geworden op: 01 feb 2006, 15:51
- Locatie: 52° 57′ NB, 5° 56′ OL
Re: Alles over de 1 serie (part III)
Nog wat foto's van de persdag:
http://3ekleuterklas.blogspot.com/2009/ ... ersen.html" onclick="window.open(this.href);return false;
Ik vond trouwens die witte van André 'n aantrekkelijke kar om te zien.Dik dingetje.
http://3ekleuterklas.blogspot.com/2009/ ... ersen.html" onclick="window.open(this.href);return false;
Ik vond trouwens die witte van André 'n aantrekkelijke kar om te zien.Dik dingetje.
- romo
- Berichten: 26921
- Lid geworden op: 04 jun 2006, 17:43
- Locatie: Create a problem Incite a reaction Propose a solution The /// M-pire strikes back
Re: Alles over de 1 serie (part III)
Rico schreef:Paar keer in het echt een 1 coupe tegen gekomen, wauw gevoel kwam nooit los.
Zo is het..........................van welke hoek je het ook bekijkt.......................de verhouding klopt nooit............
ik val in herhaling..........................nou ja....................komt de opvolger al een keer..........??
- Joop
- Berichten: 8892
- Lid geworden op: 04 mar 2007, 23:20
Re: Alles over de 1 serie (part III)
Niet goed??? Overbrenging van het diff is toch echt 3,462 voor de E81/E87 130i met handbak.Ruben schreef:Nog even een keer mijn noob vraag. Het gaat dus om het differentieel wat uit mijn 130i gehaald is. Iemand die het zeker weet en/of waar ik het op internet kan terugvinden? Op bmwfans en realoem kan ik er niks over vinden.Ruben schreef:Weet iemand wat de standaard versnellingsbak overbrenging is van een 130i? 2.47?
Met 2.47 zal de snelheid bijna 40% hoger, of draait de motor 29% lager toerental bij dezelfde snelheid...
I=3,46 volgens BMWFans
http://bmwfans.info/parts/catalog/E87/5 ... ve_output/
Anders ben ik benieuwd welke overbrenging jij bedoelt dan...
-
- Berichten: 11233
- Lid geworden op: 01 feb 2006, 12:57
Re: Alles over de 1 serie (part III)
Ik denk dat een 1 coupe met brede wielkasten en m goodies wel een dik ding wordt qua looks.
Ik ben alleen nog steeds niet overtuigd van de turbo techniek. Hoogtoerig atmo zou toch werkelijk fantastisch zijn. Maar zal wel weer de weg van de minste weerstand zijn dat betekend gewoon opgekalavaterd AG motortje van de planken halen.
Ook de x5M turbo heeft nog steeds niet het gas response als van een M3 /M5 etc. Ik zie dat ook snel veranderen. Wel verbeteren maar niet op gelijk nivo.
Ik ben alleen nog steeds niet overtuigd van de turbo techniek. Hoogtoerig atmo zou toch werkelijk fantastisch zijn. Maar zal wel weer de weg van de minste weerstand zijn dat betekend gewoon opgekalavaterd AG motortje van de planken halen.
Ook de x5M turbo heeft nog steeds niet het gas response als van een M3 /M5 etc. Ik zie dat ook snel veranderen. Wel verbeteren maar niet op gelijk nivo.
-
- Berichten: 9466
- Lid geworden op: 19 nov 2007, 15:31
Re: Alles over de 1 serie (part III)
Bedankt Joop. Iemand wil mijn oude diff over nemen die een 118d heeft. Ik wil geen appels voor citroenen verkopen, vandaar het stukje zekerheidJoop schreef:Niet goed??? Overbrenging van het diff is toch echt 3,462 voor de E81/E87 130i met handbak.Ruben schreef:Nog even een keer mijn noob vraag. Het gaat dus om het differentieel wat uit mijn 130i gehaald is. Iemand die het zeker weet en/of waar ik het op internet kan terugvinden? Op bmwfans en realoem kan ik er niks over vinden.Ruben schreef:Weet iemand wat de standaard versnellingsbak overbrenging is van een 130i? 2.47?
Met 2.47 zal de snelheid bijna 40% hoger, of draait de motor 29% lager toerental bij dezelfde snelheid...
I=3,46 volgens BMWFans
http://bmwfans.info/parts/catalog/E87/5 ... ve_output/
Anders ben ik benieuwd welke overbrenging jij bedoelt dan...
En check, gaat dus niet passen, 118d zit op 2.47.
- Sperdy
- Berichten: 4635
- Lid geworden op: 19 jul 2007, 11:56
- Locatie: Planet Earth
Re: Alles over de 1 serie (part III)
Heb dus boxter s gereden. Voor het eerst een atmo met 300+ pk. Super gasrespons! Geweldig. Tipt de standaard 135i niet aan. De ACS1 is al een stuk beter dan de standaard 135i, maar tipt noet aan de felheid van de Porsche. Bovendien, na drie keer goed doorstampen met de 135i (redline) valt het vermogen en kracht toch wat terug. Niet veel, maar wel wat. Maar die Porsche bleef het maar doen, hoe vaak je ook tot redline ging. Maar.. misschien wanneer BMW M aan dat blok sleutelt - ookal is het dan een bestaand AG blok - zou het zo maar kunnen, dat BMW /M dat wel lukt met een turbo. BMW /M heeft echt wat te verliezen als ze een fout maken lijkt me. Weet je nog hoe we klaagden over de M3V8? Dus, ik geef BMW /M zeker het voordeel van de twijfel. Kom maar op met die turbo M1.
-
- Berichten: 9466
- Lid geworden op: 19 nov 2007, 15:31
Re: Alles over de 1 serie (part III)
Als in Spyder komt niet? Ik heb altijd al geroepen dat .35i blok niks bijzonders is en je beter het .30i blok kunt hebben en ik ben geen atmo fapper
- Sperdy
- Berichten: 4635
- Lid geworden op: 19 jul 2007, 11:56
- Locatie: Planet Earth
Re: Alles over de 1 serie (part III)
De 130i ken ik niet. Het 135i blok heeft meer koppel en is daardoor lekker lui te rijden. Volgens mij 'luier' in die zin, dan een 130i. Kloppt dat? In de Spyder zit de 320pk/370nm 3.4L atmo en met 1.275kg wordt dat erg leuk.
- Joop
- Berichten: 8892
- Lid geworden op: 04 mar 2007, 23:20
Re: Alles over de 1 serie (part III)
Nu snap ik ook je twijfels...Ruben schreef:...
Bedankt Joop. Iemand wil mijn oude diff over nemen die een 118d heeft. Ik wil geen appels voor citroenen verkopen, vandaar het stukje zekerheid
En check, gaat dus niet passen, 118d zit op 2.47.
...gefacelifte 118d (E81N/E87N) heeft namelijk een eindoverbrenging 3,07 tegen de prefacelift 118d die 2,47 had en de 3,07 stond in de brochure uit de link...
...ik was al bang dat ik de vraag niet goed had begrepen...
- Sperdy
- Berichten: 4635
- Lid geworden op: 19 jul 2007, 11:56
- Locatie: Planet Earth
Re: Alles over de 1 serie (part III)
Kijk, dit is 'm nu echt: de nieuwe M1
wooaaah
wooaaah
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 421 gasten